Are you looking for the steps for the WiFi repeater 192.168.188.1 setup wizard? Facing trouble in WiFi repeater 192.168.188.1 setup wizard? If yes, then you have reached the right place. In this article, you will get to know the simple guidelines for the WiFi repeater setup by using the 192.168.188.1 setup wizard. Let’s get started.

WiFi Repeater 192.168.188.1 Setup Wizard

WiFi repeater 192.168.188.1 setup wizard is the interface from which the users can easily extend the range and coverage of the wireless signals that are coming from the existing router. With this device, you can access a reliable internet connection to every corner of your room. Basically, it is the upgraded version of the router and modem. You just need to install the WiFi repeater and connect it with the router wirelessly by using a reliable Ethernet cable. It removes the dead spots from your area so that you can enjoy the internet without any disturbance.

Step-by-Step Instructions for WiFi Repeater 192.168.188.1 Setup Wizard

Go through the below guidelines for WiFi repeater 192.168.188.1 setup wizard on your device without facing any error:

Step 1: Firstly, unbox the wireless repeater by removing all the tapes and seal all around the box.

Step 2: Plug in your repeater into the electrical socket.

Step 3: Turn on the power button of the wireless extender and check whether the solid green power LED light is blinking on the repeater or not.

Step 4: After that, press the WPS button on the wireless repeater and wait for some time. Also, press the WPS button on the WiFi router as it will reboot the whole device. Now, you will see that the WLAN light will start blinking on your device.

Step 5: Now, you can move the repeater to the place of your preference. Ensure that you are placing the repeater between halfway between the router and the area with poor wireless signals. It will provide you optimum results.

Step 6: Once you establish the connection successfully, you can open any browser of your choice.

Step 7: Enter the IP address 192.168.188.1 in the search panel of the web browser. It will navigate you to the login admin panel of the wireless extender.

Step 8: After reaching the wireless repeater login admin, enter the default username and password. If you do not know the default credential details then you can find them from the user manual that comes with the repeater or the sticker that is attached with the repeater.

Step 9: Fill Admin as the username and password in the password field.

Step 10: After entering the login details, click on the enter button.

Step 11: Now, you will be navigated to the setting page of the repeater where you will get other options. Here, you can make changes in SSID, security levels, password, LAN, WLAN, WAN, and many more.

Thus, these are the steps with which you can easily complete the wireless repeater setup by accessing the WiFi Repeater 192.168.188.1 Setup Wizard. Once you set up the repeater, you can get the controls of your extender and can manage the settings according to your requirements.